Tmedia™ TSG3200 Tsig Signaling SIGTRAN Gateway
The TSG3200 is our 1U Signaling/SIGTRAN gateway. Recognized for its high-capacity and high-performance, the TSG3200 is a High Density 16 to 64 T1/E1 (or 1 to 3 DS3, or 1 OC3/STM-1) port Signaling/SIGTRAN gateway. Contrary to the competition, the TSG3200 is a fully integrated solution. TelcoBridges Tsig Signaling / SIGTRAN Gateway & Converter supports SS7, SIGTRAN, ISDN PRI, CAS R2, and T1 CAS.
Product Characteristics
- 1U SS7/SIGTRAN gateway
- TDM interface (ordering option)
- 16 to 64 T1/E1 or 1 to 3 DS3 or 1 OC3/STM1 with APS
- SIGTRAN, SS7
- SCCP routing with Global Title Translation (GTT)
- Supports conversion from ISDN and CAS protocols
- Software upgradeable by T1/E1 increments
- Hot-swap redundant power supply (AC or DC)
- Tsig 1+1 solution option
Tsig 1+1 Protection Characteristics
- Supports all TDM interface types: T1/E1, DS3 or OC3/STM1
- Passive solution (no power required)
- Enables full-facility protection (TDM and IP)
- Active/Standby architecture with two TSG3200 units
- No single point of failure
- Five nine’s redundancy
PSTN Interfaces
- 16 to 64 T1/E1 or
- 1 to 3 DS3 or
- 1 OC3/STM1 with APS
- Independently configurable per port
- SCSI connectors to an RJ48C patch panel
Packet Interfaces
- Up to 4 Ethernet ports 100/1000Base-T
- RJ45 connectors on the rear of the unit
- Up to 16 different IP addresses
- Ethernet port bonding and 802.1q VLAN support
High Availability and Redundancy
- Power supply redundancy
- IP port redundancy
- Self-recovery software
- Fault-tolerant software
- MTP2/SS7 links redundancy
Tsig 1+1 solution (optional)
The Tsig 1+1 solution extends the high-availability and redundancy features of the TSG300
- SS7/SIGTRAN gateway redundancy (active/standby)
- Full capacity protection (TDM and IP)
- Configuration database redundancy
- Seamless software upgrade
- M3UA/MTP3/ISUP redundancy
Tsig 1+1 solution consists of:
- 1 active Tsig unit and 1 standby Tsig unit
- 1 or 2 Tsig 1+1 Patch Panel(s)
- 1+1 Patch Panels are passive (no power required)
Signaling
Simultaneously supports any combination or all of the following signaling protocols:
SS7
- Up to 64 MTP2 links (56, 64, n x 56/64 kbps) or
2 x HSL - Multiple redundant MTP2 links
- Up to 64 originating point codes and 256 link sets
- Up to 256 destination point codes
- ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92,
- ANSI 95, Q.767, Telcordia 97, ETSI v3, China,
- Singapore, UK, SPIROU, Japan NTT, Russia
- SCCP routing and global title translation (GTT) based on called/calling party, SSN and Opcode
SIGTRAN
- M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
- SCTP (raw IP and UDP)
- SS7 termination and/or relay supported\
- Up to 64 M2UA/M2PA links
- Up to 64 M3UA peer server processes
ISDN PRI
- Q.931 ISDN PRI (user and network side)
- ISDN variants: NI-2, 4ESS, 5ESS, DMS-100, DMS-250, Euro ISDN ETSI NET5 (France, Germany, UK, China, Hong Kong, Korea), Euro Numeris (VN6), NTT (Japan), Australia
- ISDN NFAS with D-channel backup
CAS
- MF R1 (including E&M, loop start, ground start)
- MF R2 (including standard ITU, Brazil, Mexico, Venezuela)
- Customizable script files to implement any CAS variant
TMG-CONTROL (Call Control)
Toolpack framework call control
- Call routing based on: trunk group, calling/called numbers (with digit manipulation) and/or various other protocol information/headers.
- Customizable routing including priority-based, load-balancing, blacklisting, call limiting, route retries, etc.
- Customizable call cause code mapping
- Programmable call routing: Access and manipulation of call parameters (SIP, SS7, and ISDN), including Nature of Address (NOA)
- RADIUS authentication and authorization (supports multiple RADIUS servers)
- NPA-NXX routing (over 5 million records)
Session management and billing
- CDR generation (RADIUS and/or CSV files)
- Integrated lawful intercept (ETSI ES 201 671 v.2.1.1)
OAMP+T (Web-based interface)
Operation and Administration
- Configuration, management, and status GUI
- CLI and configuration file machine-to-machine interface
- Configuration change audit logging
- Access, user and privilege management
- SNMP V2, V3 GET, TRAPs (alarms)
- Extensive SNMP call statistics MIBs
Management
- 2 Ethernet ports 100/1000Base-T
- 1 USB Type B serial port
- 1 RJ45 RS232 serial port
- GUI-based and CLI system upgrade
- GUI-based configuration copy, backup and restore
- Storage for multiple software versions
- Storage for multiple configuration files
- Extensive system status display
Provisioning
- Non-service affecting configuration changes
- Offline configuration validation
- Multiple configuration files archive
- Machine-to-machine configuration interface
Network Analytics (TB Analytics)
- Live call trace with protocol information and ladder diagrams
- Live test call with media playback and recording
- TB Sigtrace – Protocol signaling capture into pcap files
- Media call recording (scriptable for calling and called numbers)
Maintenance
Replaceable fan filters
Dimensions and Weight
- 1U, 19” rackmount
- 1.75” (44.5 mm) H x 16.9” (429 mm) W x 16” (406 mm) D
- 14 lbs (6.4 kg)
1+1 patch panel
- 1U, 19” rack mount
- 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
- 3.4 lbs (1.6 kg)
Electrical Characteristics (Power Input)
- 90 to 260 VAC, 47 to 63 Hz, -32 to -72 VDC
- Dual feed redundant power supplies (AC or DC)
- Maximum 70W power consumption
Safety
- CAN.CSA C22.2
- EN 60950-1:2005
- EN 60950-1:2006
EMC
FCC Part 15:2013, Subpart B, CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)
Environmental
- Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
- Storage temperature:-10 to +85 °C, 95% rel. hum. non-condensing
- Designed to meet NEBS Level 3
- RoHS compliant
Have more questions about Telcobridges media gateways? Call us at 410-583-1701 or email us at
