- U-Interface, high-speed inverse multiplexer for ISDN
- Terminates up to four BRI lines
- Includes NT1 functionality
- Provides for dial up leased line access
- Videoconferencing, LAN/WAN connectivity, high-speed file transfer, audio broadcasting, and T1 backup applications
- Synchronous data transfer from 56 Kbps to 512 Kbps
- BONDING Mode 1 synchronizes data over up to eight 64 Kbps B-Channels
- Configuration via front panel keypad, VT100, or remotely over the ISDN line
- Dialing via front panel, stored numbers, DTR assertion, V.25 bis, or RS-366
- Remote upgrade via flash downloads
- EIA-530 and V.35 interfaces
- Available bundled with one RS-530 to V.35 adapter cable and one RS-366 "Y" cable for dual port dialing support
- S/T-Interface version available with Euro power supplies for multinational applications. Also available bundled with one RS-530 to V.35 adapter cable and one RS-366 "Y" cable (Call Pre-Sales Applications Engineering at 800-615-1176 for up-to-date country approvals)
- North American switch type support for U-Interface and S/T versions include AT&T 5ESS, Northern Telecom DMS100, VN3, ITR6, TPN1962, NTT, KDD, EURO-ISDN, TDX10, TDX1B switches and NEC
- Multinational switch type support for international S/T-Interface version includes TDX10, TDX1B, Euro-ISDN Net3, and VN4
- 10bt for SNMP management
The ADTRAN ISU� 512e is a standalone ISDN Service Unit that connects data terminal equipment (DTE) to the ISDN network. The ISU 512e is �specifically designed as a low-cost solution for applications such as video-conferencing, T-1 backup, LAN/WAN connectivity, and high-speed file transfer.
The ISU 512e is designed as a cost effective inverse multiplexer for 384 kbps videoconferencing. Some videoconferencing products operate in a dual port mode. The ISU 512e is designed to operate in a dual port mode making it backward compatible with videoconferencing systems utilizing two Switched 56 DSUs or a dual port ISDN terminal adapter.
The ISU 512e connects directly to the ISDN network using up to four Basic Rate ISDN (BRI) lines. By terminating four BRI circuits, the ISU 512e can create an aggregate bandwidth of up to 512 kbps which can be used to backup a T-1 circuit. Since ISDN is a switched digital service, bandwidth can be established and utilized on an as needed basis. Therefore, the ISU 512 is well suited for applications where a high bandwidth connection is needed to support bursty or infrequent traffic like medical image or large file transfer.
The ISU 512e may utilize either the V.35 or RS-530 DTE interface and supports synchronous data rates from 56 kbps to 512 kbps. At rates over 64 kbps, the BONDING Mode 1 inverse multiplexing protocol synchronizes data using from one to eight 64 kbps B channels. By supporting BONDING the ISU 512e interoperates with other BONDING-compatible inverse multiplexers and ISDN terminal adapters.
The ISU 512e can be configured and maintained, locally or remotely via an Ethernet port, using a VT100 terminal interface. For remote configuration, the unit can be accessed over the ISDN line or externally through the CHAIN IN port on the back panel of the unit. The front panel of the ISU 512e consists of a two-line by 16 character LCD display, seven LEDs, and a 16-button keypad. This allows for configuring, dialing, testing, and monitoring of the unit without data terminal or test equipment. Dialing from the unit is accomplished by using the front panel, stored numbers, DTR assertion, or V.25 bis in-band dialing. The RS-366 parallel dial interface is available for applications such as videoconferencing.
The ISU 512e also supports dedicated 2B1Q services. This provides a dedicated point-to point service (as in a limited distance modern or leased line application) with no dialing necessary.