Pulse provides solutions for Premium Data and Voice Routing

 

Memotec NetPerformer 8400 Serial Port Extender

 

 

Specifications




LINK PORT
 
Leased Lines:
Serial synchronous full duplex, Frame Relay, HDLC and PPP, PowerCell

IP WAN:
Ethernet, PPP, Frame Relay RFC-1490 and PowerCell over IP
 
Frame Relay:
UNI User and Network, RFC1490, PowerCell

Local management interface:
LMI, ANSI T1.617/annex D, ITUT, Q.933/annex A, CLLM or disabled

PVCs:
300 per node, automatic DLCI discovery
 
Switched Lines and Dial back-up:
PowerCell over serial ports or IP
 
Dialing protocols:
V.25bis, X.21, AT and control leads
 
Speed With data compression disabled: 8 Mbps/1 port, 2 Mbps/other ports With data compression enabled: Up to 2 Mbps *Maximum speed is protocol dependent
 
PHYSICAL

System Details
- Universal serial port: 4 or 8
- Connector: DTE or DCE, HD26F connector, Internal/external clocking
- Ethernet:1 X 10/100BaseT (RJ45 connector)
- Power: 90-264 VAC Auto-sensing, 50/60 Hz, up to 30 watts -Redundancy: 1:1

Chassis Stand-alone base unit. 19” Rack mount
Dimensions (H x W x D) 44 x 427 x 205mm
Weight 2.7 kg
 
ENVIRONMENTAL

Operating Temperature 0º to 45º Celsius / 32° to 113° Fahrenheit
 
Storage Temperature -20º to 65º Celsius / -4° to 149° Fahrenheit

Relative Humidity 10% to 90%, non-condensing


NETWORK

Topology QoS Mesh, hierarchical, star, point-to-point, Satellite point-to-point/multipoint (SkyPerformer option) Automatic load balancing, bandwidth on demand (over leased line), dial back-up, time-of-day connect 8 classes of services, 16 priority weights
 
DATA

Sync:
PPP, BDLC, HDLC, SDLC, X.25, X.25 over Frame Relay annex F/G

Legacy Sync:
COP, BSC, VIP, IBM/RJE, Uniscope, Poll/Select, Siemens Nixdorf, JCA, Zengin, Transparent pass through over PowerCell or over Frame Relay
 
Frame Relay:
RFC-1490, UNI-DTE, UNI-DCE
 
Asynchronous:
PPP, ENQ/ACK, XON/XOFF, transparent LAN

Filter criteria:
Based on protocol, address (source, destination or SAP), TOS bit/diff. Serv or custom filtering
 
Ports:
1X fully routed 10/100Base-T, two (2) IP address per port
 
Ethernet interfaces:
Ethernet II and IEEE 802.2, 802.3, SNAP

Standards:
IP RIP V1/V2 or Static, OSPF, NAT, IP Multicast IGMP V1/V2 PIM-DM, BootP/DHCP relay, DHCP client, IPX RIP and SAP, LLC2, 802.1p/q prioritization and VLAN, 802.1D Spanning Tree Protocol(STP), MAC Layer

NETWORK MANAGEMENT

SNMP management via ACTView 3000 for HP OpenView NNM for Windows

Menu driven async console port (VT-100) via RJ45 connector, auto-sensing DTE/DCE, speed up to 115,200 bps

Remote Telnet access to command port

Traps, traces and extended statistics

 

COMPLIANCE AND AGENCY APPROVAL


Complies with or has obtained Regulatory Agency approval
for at least the following standards:

EMC – Emission FCC CFR 47 Part 15, Classe B EN55022:1998, AS/NZS CISPR22

EMC – Immunity EN 55024:1998 + A1 + A2

Safety: IEC 60950 (1999), EN 60950 (2000), AS/NZS 60950 (2000) + A1,CSA C22.2 N° 60950-1,UL 60950-1

Telecom: TBR1 + TBR2





 

Related Documents




Contact us for any technical or sales questions you may have on the SDM-8400 Serial Port Externder.